The Australian Phenology Product is a continental data set that allows the quantitative analysis of Australia’s phenology derived from MODIS Enhanced Vegetation Index (EVI) data using an algorithm designed to accommodate Australian conditions. The product can be used to characterize phenological cycles of greening and browning and quantify the cycles’ inter and intra annual variability from 2003 to 2018 across Australia. Phenological cycles are defined as a period of EVI-measured greening and browning that may occur at any time of the year, extend across the end of a year, skip a year (not occur for one or multiple years) or occur more than once a year. Multiple phenological cycles within a year can occur in the form of double cropping in agricultural areas or be caused by a-seasonal rain events in water limited environments. Based on per-pixel greenness trajectories measured by MODIS EVI, phenological cycle curves were modelled and their key properties in the form of phenological curve metrics were derived including: the first and second minimum point, peak, start and end of cycle; length of cycle, and; the amplitude of the cycle. Integrated EVI under the curve between the start and end of the cycle time of each cycle is calculated as a proxy of productivity.

This data release consists of flux tower measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer in semi-arid eucalypt woodland using eddy covariance techniques. It been processed using PyFluxPro (v3.3.3) as described in Isaac et al. (2017), <a href="https://doi.org/10.5194/bg-14-2903-2017">https://doi.org/10.5194/bg-14-2903-2017</a>. PyFluxPro takes data recorded at the flux tower and process this data to a final, gap-filled product with Net Ecosystem Exchange (NEE) partitioned into Gross Primary Productivity (GPP) and Ecosystem Respiration (ER). For more information about the processing levels, see <a href="https://github.com/OzFlux/PyFluxPro/wiki">https://github.com/OzFlux</a>.<br /> <br />The Ti Tree East site was established in July 2012 and is managed by the University of Technology Sydney. Pine Hill Station is a functioning cattle station that has been in operation for longer than 50 years. However, the east side has not been stocked in over three years. The site is a mosaic of the primary semi-arid biomes of central Australia: grassy mulga woodland and Corymbia/Triodia savanna.The woodland is characterised by a mulga (Acacia aneura) canopy, which is 4.85 m tall on average. The soil is red sand overlying an 8 m deep water table. Elevation of the site is 553 m above sea level, and the terrain is flat. Mean annual precipitation at the nearby (30 km to the south) Bureau of Meteorology station is 305.9 mm but ranges between 100 mm in 2009 to 750 mm in 2010. Predominant wind directions are from the southeast and east. The instrument mast is 10 m tall. Fluxes of heat, water vapour and carbon are measured using the open-path eddy covariance technique at 9.81m. Supplementary measurements above the canopy include temperature and humidity (9.81 m), windspeed and wind direction (8.28 m), downwelling and upwelling shortwave and longwave radiation (9.9 m). Precipitation is monitored in the savanna (2.5m). Supplementary measurements within and below the canopy include barometric pressure (2 m). Below ground soil measurements are made beneath Triodia, mulga and grassy understorey and include ground heat flux (0.08 m), soil temperature (0.02 m – 0.06 m) and soil moisture (0 – 0.1m, 0.1 – 0.3m, 0.6 – 0.8m and 1.0 – 1.2m). <br />For additional site information, see http://ozflux.org.au/siteOfTheMonth/2020-09Alice-and-TiTree/2020-09Alice-and-TiTree.html . <br /><br />

This data release consists of flux tower measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer in semi-arid eucalypt woodland using eddy covariance techniques. It been processed using PyFluxPro (v3.3.1) as described in Isaac et al. (2017), <a href="https://doi.org/10.5194/bg-14-2903-2017">https://doi.org/10.5194/bg-14-2903-2017</a>. PyFluxPro takes data recorded at the flux tower and process this data to a final, gap-filled product with Net Ecosystem Exchange (NEE) partitioned into Gross Primary Productivity (GPP) and Ecosystem Respiration (ER). For more information about the processing levels, see <a href="https://github.com/OzFlux/PyFluxPro/wiki">https://github.com/OzFlux</a>.<br /> <br />The Ti Tree East site was established in July 2012 and is managed by the University of Technology Sydney. Pine Hill Station is a functioning cattle station that has been in operation for longer than 50 years. However, the east side has not been stocked in over three years. The site is a mosaic of the primary semi-arid biomes of central Australia: grassy mulga woodland and Corymbia/Triodia savanna.The woodland is characterised by a mulga (Acacia aneura) canopy, which is 4.85 m tall on average. The soil is red sand overlying an 8 m deep water table. Elevation of the site is 553 m above sea level, and the terrain is flat. Mean annual precipitation at the nearby (30 km to the south) Bureau of Meteorology station is 305.9 mm but ranges between 100 mm in 2009 to 750 mm in 2010. Predominant wind directions are from the southeast and east. The instrument mast is 10 m tall. Fluxes of heat, water vapour and carbon are measured using the open-path eddy covariance technique at 9.81m. Supplementary measurements above the canopy include temperature and humidity (9.81 m), windspeed and wind direction (8.28 m), downwelling and upwelling shortwave and longwave radiation (9.9 m). Precipitation is monitored in the savanna (2.5m). Supplementary measurements within and below the canopy include barometric pressure (2 m). Below ground soil measurements are made beneath Triodia, mulga and grassy understorey and include ground heat flux (0.08 m), soil temperature (0.02 m – 0.06 m) and soil moisture (0 – 0.1m, 0.1 – 0.3m, 0.6 – 0.8m and 1.0 – 1.2m). <br />For additional site information, see http://ozflux.org.au/siteOfTheMonth/2020-09Alice-and-TiTree/2020-09Alice-and-TiTree.html . <br /><br />

This dataset consists of measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer at Pine Hill cattle station in the Northern Territory using eddy covariance techniques. <br /> <br /> The Ti Tree East site was established in July 2012 and is managed by the University of Technology Sydney. Pine Hill Station is a functioning cattle station that has been in operation for longer than 50 years. However, the east side has not been stocked in over three years. The site is a mosaic of the primary semi-arid biomes of central Australia: grassy mulga woodland and Corymbia/Triodia savanna.The woodland is characterised by a mulga (Acacia aneura) canopy, which is 4.85 m tall on average. The soil is red sand overlying an 8 m deep water table. Elevation of the site is 553 m above sea level, and the terrain is flat. Mean annual precipitation at the nearby (30 km to the south) Bureau of Meteorology station is 305.9 mm but ranges between 100 mm in 2009 to 750 mm in 2010. Predominant wind directions are from the southeast and east. The instrument mast is 10 m tall. Fluxes of heat, water vapour and carbon are measured using the open-path eddy covariance technique at 9.81m. Supplementary measurements above the canopy include temperature and humidity (9.81 m), windspeed and wind direction (8.28 m), downwelling and upwelling shortwave and longwave radiation (9.9 m). Precipitation is monitored in the savanna (2.5m). Supplementary measurements within and below the canopy include barometric pressure (2 m). Below ground soil measurements are made beneath Triodia, mulga and grassy understorey and include ground heat flux (0.08 m), soil temperature (0.02 m – 0.06 m) and soil moisture (0 – 0.1m, 0.1 – 0.3m, 0.6 – 0.8m and 1.0 – 1.2m). <br />For additional site information, see http://ozflux.org.au/siteOfTheMonth/2020-09Alice-and-TiTree/2020-09Alice-and-TiTree.html . <br />This data is also available at http://data.ozflux.org.au .<br />

This dataset consists of measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer in semi-arid Mulga woodland, using eddy covariance techniques. <br /> <br /> The Alice Springs Mulga flux station is located on Pine Hill cattle station, near Alice Springs in the Northern Territory. The woodland is characterized by the Acacia aneura canopy, which is 6.5m tall on average. Elevation of the site is 606m above sea level, and the terrain is flat. Mean annual precipitation at the nearby (45km distant) Bureau of Meteorology station is 305.9mm but ranges between 100mm in 2009 to 750mm in 2010. Predominant wind directions are from the southeast and east.The extent of the woodland is 11km to the east of the flux station and 16km to the south. The soil is red sandy clay (50:50 sand:clay) overlying a 49m deep water table. Pine Hill Station is a functioning cattle station that has been in operation for longer than 50 years.The instrument mast is 13.7m tall. Fluxes of heat, water vapour and carbon are measured using the open-path eddy covariance technique at 11.6m. Supplementary measurements above the canopy include temperature and humidity (11.6m), windspeed and wind direction (9.25m), downwelling and upwelling shortwave and longwave radiation (12.2m). Precipitation is monitored in a canopy gap (2.5m). Supplementary measurements within and below the canopy include barometric pressure (1m), wind speed (2m, 4.25m and 6.5m), and temperature and humidity (2m, 4.25m and 6m). Below ground soil measurements are made in bare soil, mulga, and understory habitats and include ground heat flux (0.08m), soil temperature (0.02m – 0.06m) and soil moisture (0 – 0.1m, 0.1 – 0.3m, 0.6 – 0.8m and 1.0 – 1.2m). Ancillary measurements include soil water and carbon fluxes, leaf water potential, leaf gas exchange, stem basal area, stem growth, litter production, leaf area index, stem hydraulic conductance, and carbon and water stable isotope ratios. The site was established in September 2010 in conjunction with the Woodforde River NGCRT Superscience Site and is managed by the University of Technology Sydney. <br />For additional site information, see https://www.tern.org.au/tern-observatory/tern-ecosystem-processes/alice-mulga-supersite/ <br /><br /> This data is also available at http://data.ozflux.org.au .

High quality digital images are captured using a digital SLR camera at the plots (core 1 hectare vegetation plot and Ti Tree East) at the TERN Alice Mulga SuperSite using the panoramic photopoint method. The panoramic photopoint method may be the most informative in open forests/woodlands and rangelands. Three photopoints are established configured in an equilateral triangle (2.5m sides) with the centre marked with a star dropper and the location recorded with DGPS. At each photopoint take photographic sequences in a 360° panorama, with up to 40 photographs with a minimum 50% overlap between consecutive photographs. For more information about the method, see <a href= 'http://dx.doi.org/10.13140/2.1.4287.3607'>White, el al. (2012) AusPlots Rangelands Survey Protocols Manual Version 1.2.9.</a> <br> The Alice Mulga SuperSite was established in 2010 at Pine Hill Cattle Station with research plots located in low open woodland Mulga (Acacia aneura) and non-Acacia, hummock grassland, and river red gum forest. For additional site information, see <a href = 'https://www.tern.org.au/tern-observatory/tern-ecosystem-processes/alice-mulga-supersite/'>https://www.tern.org.au/tern-observatory/tern-ecosystem-processes/alice-mulga-supersite</a> . <br> Other images collected at the site include digital cover photography, phenocam time-lapse images taken from fixed under and overstorey cameras, five-photopoint images, and ancillary images of fauna and flora. <br><br>

This dataset consists of images of fauna, flora, fungi or general scenery or events captured at the site on an ad-hoc basis and may provide the researcher with information regarding the species that occupy, frequent or traverse this site.<br /> The Alice Mulga SuperSite was established in 2010 at Pine Hill Cattle Station with research plots located in low open woodland Mulga (<em>Acacia aneura</em>) and non-Acacia, hummock grassland, and river red gum forest. The core 1 ha plot is located in a dense Mulga woodland (cover 70–80%). For additional site information, see https://www.tern.org.au/tern-observatory/tern-ecosystem-processes/alice-mulga-supersite/ . <br /> Other images collected at the site include digital cover photography, phenocam time-lapse images taken from fixed under and overstorey cameras, panoramic landscape and photopoint images.

This data release consists of flux tower measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer in semi-arid eucalypt woodland using eddy covariance techniques. It been processed using PyFluxPro (v3.3.1) as described in Isaac et al. (2017), <a href="https://doi.org/10.5194/bg-14-2903-2017">https://doi.org/10.5194/bg-14-2903-2017</a>. PyFluxPro takes data recorded at the flux tower and process this data to a final, gap-filled product with Net Ecosystem Exchange (NEE) partitioned into Gross Primary Productivity (GPP) and Ecosystem Respiration (ER). For more information about the processing levels, see <a href="https://github.com/OzFlux/PyFluxPro/wiki">https://github.com/OzFlux/PyFluxPro/wiki</a>.<br /> <br />The Alice Springs Mulga flux station is located on Pine Hill cattle station, near Alice Springs in the Northern Territory. The woodland is characterized by the Acacia aneura canopy, which is 6.5m tall on average. Elevation of the site is 606m above sea level, and the terrain is flat. Mean annual precipitation at the nearby (45km distant) Bureau of Meteorology station is 305.9mm but ranges between 100mm in 2009 to 750mm in 2010. Predominant wind directions are from the southeast and east.The extent of the woodland is 11km to the east of the flux station and 16km to the south. The soil is red sandy clay (50:50 sand:clay) overlying a 49m deep water table. Pine Hill Station is a functioning cattle station that has been in operation for longer than 50 years.The instrument mast is 13.7m tall. Fluxes of heat, water vapour and carbon are measured using the open-path eddy covariance technique at 11.6m. Supplementary measurements above the canopy include temperature and humidity (11.6m), windspeed and wind direction (9.25m), downwelling and upwelling shortwave and longwave radiation (12.2m). Precipitation is monitored in a canopy gap (2.5m). Supplementary measurements within and below the canopy include barometric pressure (1m), wind speed (2m, 4.25m and 6.5m), and temperature and humidity (2m, 4.25m and 6m). Below ground soil measurements are made in bare soil, mulga, and understory habitats and include ground heat flux (0.08m), soil temperature (0.02m – 0.06m) and soil moisture (0 – 0.1m, 0.1 – 0.3m, 0.6 – 0.8m and 1.0 – 1.2m). Ancillary measurements include soil water and carbon fluxes, leaf water potential, leaf gas exchange, stem basal area, stem growth, litter production, leaf area index, stem hydraulic conductance, and carbon and water stable isotope ratios. The site was established in September 2010 in conjunction with the Woodforde River NGCRT Superscience Site and is managed by the University of Technology Sydney.<br />For additional site information, see https://www.tern.org.au/tern-observatory/tern-ecosystem-processes/alice-mulga-supersite/ <br /><br />

This data release consists of flux tower measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer in semi-arid eucalypt woodland using eddy covariance techniques. It been processed using PyFluxPro (v3.3.3) as described in Isaac et al. (2017), <a href="https://doi.org/10.5194/bg-14-2903-2017">https://doi.org/10.5194/bg-14-2903-2017</a>. PyFluxPro takes data recorded at the flux tower and process this data to a final, gap-filled product with Net Ecosystem Exchange (NEE) partitioned into Gross Primary Productivity (GPP) and Ecosystem Respiration (ER). For more information about the processing levels, see <a href="https://github.com/OzFlux/PyFluxPro/wiki">https://github.com/OzFlux/PyFluxPro/wiki</a>.<br /> <br />The Alice Springs Mulga flux station is located on Pine Hill cattle station, near Alice Springs in the Northern Territory. The woodland is characterized by the Acacia aneura canopy, which is 6.5m tall on average. Elevation of the site is 606m above sea level, and the terrain is flat. Mean annual precipitation at the nearby (45km distant) Bureau of Meteorology station is 305.9mm but ranges between 100mm in 2009 to 750mm in 2010. Predominant wind directions are from the southeast and east.The extent of the woodland is 11km to the east of the flux station and 16km to the south. The soil is red sandy clay (50:50 sand:clay) overlying a 49m deep water table. Pine Hill Station is a functioning cattle station that has been in operation for longer than 50 years.The instrument mast is 13.7m tall. Fluxes of heat, water vapour and carbon are measured using the open-path eddy covariance technique at 11.6m. Supplementary measurements above the canopy include temperature and humidity (11.6m), windspeed and wind direction (9.25m), downwelling and upwelling shortwave and longwave radiation (12.2m). Precipitation is monitored in a canopy gap (2.5m). Supplementary measurements within and below the canopy include barometric pressure (1m), wind speed (2m, 4.25m and 6.5m), and temperature and humidity (2m, 4.25m and 6m). Below ground soil measurements are made in bare soil, mulga, and understory habitats and include ground heat flux (0.08m), soil temperature (0.02m – 0.06m) and soil moisture (0 – 0.1m, 0.1 – 0.3m, 0.6 – 0.8m and 1.0 – 1.2m). Ancillary measurements include soil water and carbon fluxes, leaf water potential, leaf gas exchange, stem basal area, stem growth, litter production, leaf area index, stem hydraulic conductance, and carbon and water stable isotope ratios. The site was established in September 2010 in conjunction with the Woodforde River NGCRT Superscience Site and is managed by the University of Technology Sydney.<br />For additional site information, see https://www.tern.org.au/tern-observatory/tern-ecosystem-processes/alice-mulga-supersite/ <br /><br />

Digital Cover Photography (DCP) upward-looking images are collected ideally twice per year (depending upon travel availability) to capture vegetation cover at Alice Mulga SuperSite. These images can be used to estimate Leaf area index (LAI), Crown Cover or Foliage Projective Cover (FPC). The Alice Mulga SuperSite was established in 2010 at Pine Hill Cattle Station with research plots located in low open woodland Mulga (<em>Acacia aneura</em>) and non-Acacia, hummock grassland, and river red gum forest. The core 1 ha plot is located in a dense Mulga woodland (cover 70–80%). For additional site information, see https://www.tern.org.au/tern-observatory/tern-ecosystem-processes/alice-mulga-supersite/ . Other images collected at the site include photopoints, phenocam time-lapse images taken from fixed under and overstorey cameras, panoramic landscape and ancillary images of fauna and flora.